Production Process Of Self-Clinching Nuts

Jul 04, 2025

Leave a message


Self-Clinching nuts, also known as rivet nuts or self-clinching nuts, are a type of nut used on thin plates or sheet metal. They are round in shape, with embossed teeth and a guide groove on one end. The embossed teeth are pressed into a pre-set hole in the sheet metal. Generally, the pre-set hole diameter is slightly smaller than the embossed teeth of the self-clinching nut. Pressure forces the teeth of the self-clinching nut into the sheet metal, causing plastic deformation around the pre-set hole. The deformed material is then forced into the guide groove, creating a locking effect.

The production process of self-clinching nuts is similar to that of other screws. Screws are driven with a screwdriver, while nuts are driven with a nut driver. Let's explain the production process of self-clinching nuts.


1. First, determine the material of the self-clinching nut. This allows us to determine the right material and material to use for production. Once we know the material and material, we can then purchase the screw and wire.
2. Determine the specifications and type of the self-clinching nut, and examine its size and length. This will help us determine the correct screw and wire size.
3. After determining the material, material, size, and type, we need to check whether it's a commonly used self-clinching nut. If so, the factory will likely have the corresponding mold. If not, or the product is non-standard, we'll need to order a mold.
4. Once everything is ready, the self-clinching nut's shape-its appearance-is punched out using a nut punching machine.
5. After punching, it's tapped using a nut tapping machine.
6. After the threads are tapped, electroplating is performed. Stainless steel self-clinching nuts do not require electroplating; they only require cleaning. For other color plating, the nut must be plated at a professional electroplating facility.